| 3D Stereo Tango |
|
|
| 3DTANGO |
3D Stereo Tango in carbon fiber (without motors) |
|
CAD $70,000 |
| BSPLIT |
Spare beam splitter for the 3D Stereo Tango |
|
CAD $5000 |
| S12KBLOCK |
Pair of riser blocks for the 2K MiniSI cameras, including inverter block to accommodate the rolling shutter of both cameras to be in running in the same direction. This riser block brings the 2K Mini SI optical axis to the same height as the non inverted 2K Mini SI camera, so the standard ARRI bridgeplates can be used. |
|
CAD $1,900 |
| REDINV |
Inverter block for the RED cameras to accommodate the rolling shutter of both cameras to be in running in the same direction. This inverter block brings the optical axis of the RED to the same height as the non-inverted RED camera, so the standard ARRI bridgeplates can be used in order to mount the lens motors. |
|
CAD $1,500 |
| SONYFINV |
Inverter block for the SONY F-35 & F-23 cameras to accommodate the rolling shutter of both cameras to be in running in the same direction. This inverter block brings the optical axis of the F-35 & F-23 cameras to the same height as the non-inverted F-35 & F-23 cameras, so the standard ARRI bridgeplates can be used in order to mount the lens motors. |
|
CAD $1,500 |
| SONYHDC-P1 |
Inverter block for the SONY HDC-P1 cameras to accommodate the rolling shutter of both cameras to be in running in the same direction. This inverter block brings the optical axis of the HDC-P1 to the same height as the non-inverted HDC-P1, so the standard ARRI bridgeplates can be used in order to mount the lens motors. |
|
CAD $1,500 |
| PROTRACTOR |
Digital protractor: A digital level with 0.01ยบ accuracy makes the camera leveling quick and precise. |
|
CAD $550 |
| Tango
/ Swing Head System |
|
|
| TANGO |
Tango/Swing Head Mark II (manual) |
|
CAD $7,000 |
| TANGOELEC |
Tango/Swing Head (motorized) |
|
CAD $18,000 |
| TANGOValise |
Tango/Swing Head transport case |
|
CAD $250 |
| TangoW |
Tango handwheel modification kit |
|
CAD $800 |
| Blue
Handle System
(in Euros)
|
| MOD-01 |
19mm Iris rods bridge |
|
€ 305.00 |
| MOD-02 |
15mm Iris rods bridge |
|
€ 305.00 |
| MOD-03 |
15mm Lightweight bridge |
|
€ 297.00 |
| MOD-04 |
Short 30 degree offset arm 90 mm |
|
€ 202.00 |
| MOD-05 |
Long 30 degree offset arm 140 mm |
|
€ 221.00 |
| MOD-06 |
Handle |
|
€ 202.00 |
| MOD-07 |
90 degree Elbow |
|
€ 202.00 |
| MOD-08 |
ARRI/ARRI Rosette adapter |
|
€ 137.00 |
| MOD-09 |
Right angle offset adapter |
|
€ 205.00 |
| MOD-10 |
Accessory arm |
|
€ 133.00 |
| MOD-11 |
ARRI / Aaton rosette adapter |
|
€ 137.00 |
| MOD-12 |
ARRI / Moviecam rosette adapter |
|
€ 137.00 |
| MOD-13 |
Replacement rosette ARRI/ Aaton / Moviecam |
|
€ 43.00 |
| MOD-14 |
Replacement locking knob assembly |
|
€ 27.00 |
| MOD-15/15 |
15mm Collar |
|
€ 305.00 |
| MOD-15/19 |
19mm Collar |
|
€ 305.00 |
| MOD-16 |
Adaptor for OPPENHEIMER handle |
|
€ 206.00 |
| MOD-17 |
90mm vertical long offset arm |
|
€ 202.00 |
| MOD-18 |
140mm vertical long offset arm |
|
€ 221.00 |
| MOD-19 |
90mm horizontal extension |
|
€ 223.00 |
| MOD-20 |
15mm stud with 3/8-16 thread |
|
€ 65.00 |
| MOD-29 |
ARRI III Accessory holder |
|
€ 125.00 |
| MOD-32 |
Panavision holder for MOD-06 (for camera's left side) |
|
€ 198.00 |
| MOD-25 |
Panavision shoulder adapter |
|
€ 551.00 |
| MOD-41 |
Bracket to mount Digital Microforce onto fluid heads |
|
€ 267.00 |
| MOD-42 |
Bracket to mount Hoppenheimer handle onto fluid heads |
|
€ 372 |
| MOD-43 |
Bracket to mount Blue Modular Handles onto fluid heads |
|
€ 372 |
| MOD-44 |
Adapter ring to mount MOD-43 onto all fluid heads |
|
€ 31 |