 |
 |
Mod-03
Mod-02 Mod-01
Mod-01: 19mm Iris Rods Bridge (for 19mm bridge plate system)
Mod-02: 15mm Iris Rods Bridge (for 15mm bridge plate system)
Mod-03: 15mm light weight Rods Bridge (for S16mm and Video bridge plate systems)
These bridges are the base of the blue handle system; they fit onto the iris rods coming off the camera's bridge plate and will accept the many accessories described bellow. |
 |
|
Mod-04
Mod-05
Mod-04:
30 degree Offset 90mm
Mod-05: 30 degree Offset140mm
These brackets allow deporting the handle (Mod-06) 30 degrees away from the Iris Rods Bridge (Mod-01/02/03) in order to provide an optimum stability to the camera (wider spacing of the operator's hands, optimum weight balance of the camera load, regardless of the less used.) |
 |
|
Mod-06
Mod-06: Handle
This handle will attach itself either onto the Iris Rods Bridge (Mod-01/02/03) or to any of the available Offsets (Mod-04/05/17/18) or Brackets (Mod-09). |
 |
|
Mod-07
Mod-07:
90 degree Elbow
This 90 degrees elbow offers a 3rd axis to the positioning of the handle (Mod-06), or for example to combine a Mod-05 with a Mod-10 in order to have a 360 degree swivel for the LCD monitor support. |
 |
|
Mod-08
Mod-11 Mod-12
Mod-08: Aaton rosette to ARRI rosette converter
Mod-11: ARRI rosette to ARRI rosette converter
Mod-12: Moviecam to ARRI rosette converter
These adapters allow you to interface the blue handle system to any other camera systems available. For example you can attach the Aaton or Moviecam pistol grip to the blue handle system and take advantage of the ON/OFF switch feature. |
 |
|
Mod-09
Mod-09: 90 degree Offset
This offset is very useful to go around a follow focus disc if located close to the camera body for example. It also allow to attach two other bracket out of one anchor point. |
 |
|
Mod-10
Mod-10:
Accessory Holder
This bracket will hold LCD monitors, video/lens transmitters, etc. Very useful, it offers 360 degrees positioning of any accessory you would otherwise Velcro to the camera body. It also helps a lot to balance the weight load of the camera in handheld and steadicam configurations. It is a very secure fastener. |
 |
|
Mod-15/15
Mod-15/5
Mod-15/15:
to clamp on any 15mm iris rod or spigot.
Mod-15/5:
to clamp on any 19mm iris rod or spigot.
It allows you to attach a handle (Mod-06) directly to an iris rod or to attach the accessory holder (Mod-10) to a spigot for example. |
 |
|
Mod-16
Mod-16: Oppenheimer adapter
This adapter accepts any Microforce Oppenheimer handle and interfaces it to the blue handle system; it can come in place of a Mod-06 for example. |
 |
|
Mod-17
Mod-18
Mod-17:
Straight 90mm offset
Mod-18: Straight 140mm offset
These brackets allow deporting the handle (Mod-06) away from the Iris Rods Bridge (Mod-01/02/03) in order to provide an optimum stability to the camera (wider spacing of the operator's hands, optimum weight balance of the camera load, regardless of the less used). Same as Mod-04 & Mod-05 without the 30 degree deport. |
|
|
Mod-19
Mod-19:
90mm horizontal offset
This offset is designed to provide a wider spacing between the operator’s hands to increase the stability of the camera. It can also be attached to the camera body and give a grip to any other module of the blue handle system. |
 |
|
Mod-23
Mod-23: universal LCD monitor
support.
This module will support any LCD monitor up to 6" wide and will accept a handle (Mod-06) or a 15mm spigot. This allow you to hold your LCD monitor and to leave it on any light stand available on the set, or even on the camera. Very cool! |
 |
|
Mod-21
Mod-21
Mod-21 is a swivel adapter with internal friction adjustment. 360 degrees rotation, rosettes on either sides. |
 |
|
Mod-X
Mod-X: Bracket designed to hold the Transvideo 6" Cinemonitor LCD.
It provides you with a 360 degree pan function and a nice hold function: a must have with the 6” Transvideo Cinemonitor. |
 |
|
Mod-20
Mod-22
Mod-20
Mod-22
They are both useful to attach a lighting fixture on the accessory holder (MOD-10) |
| |
|
|
